How should volatile oil and gas generated during the oil storage and unloading processes at gas stations be collected and treated? Shandong Kosman Environmental Technology Co., Ltd. can supply oil and gas recovery equipment for gas stations. The following is an introduction to relevant information about the equipment.
I. Product Overview
Gas station oil and gas recovery equipment is mostly a skid-mounted, integrated treatment unit, generally classified as tertiary oil and gas recovery equipment. The components in contact with the medium are mostly made of stainless steel. The equipment integrates condensation, adsorption, or membrane separation process modules and is equipped with refrigeration units, vacuum pumps, pipeline valves, explosion-proof electrical controls, pressure sensing components, and other auxiliary components. Equipment specifications can be adjusted according to the gas station's tank volume and the amount of oil and gas generated, and the equipment is manufactured and assembled in accordance with relevant explosion-proof and environmental protection standards.
II. Basic Product Features
The equipment is skid-mounted and integrated, occupying a relatively small footprint and facilitating on-site installation. The entire unit is explosion-proof and suitable for the flammable and explosive conditions of gas stations. It is equipped with a pressure sensing and automatic control module, allowing the equipment to start and stop automatically based on tank pressure. Some models are equipped with an oil and gas return pipeline, allowing the separated liquid oil to flow back into the storage tank. Different process schemes result in variations in processing capacity, energy consumption, and maintenance cycles.
III. Basic Usage Instructions
Before commissioning, check the pipeline seals, valve status, power supply, and explosion-proof accessories against the technical documents. Complete the airtightness test and activate the tank pressure monitoring component. After confirming that all parameters are normal, set the operating threshold and switch to automatic operation mode. During daily monitoring, regularly check the pressure, temperature, and equipment operating status, and periodically inspect the filter element, adsorption material, and seals. If the equipment triggers an alarm, develops a leak, produces abnormal noises, or shows other abnormalities, it should be stopped immediately, the gas supply should be cut off, and troubleshooting and corrective measures should be carried out. During shutdown maintenance, follow the safety operating procedures for oil and gas sites.
IV. Scope of Application
This equipment is mainly used for the treatment of oil and gas generated by the breathing of underground oil storage tanks at gas stations. It is used in conjunction with primary and secondary oil and gas recovery systems and is primarily used at gas stations handling gasoline. This equipment is a terminal oil and gas treatment facility and needs to be integrated with the station's fire protection, closed-loop oil transportation, and safety management systems. It cannot replace the gas station's overall safety management plan, and its operational emissions require environmental monitoring.
Summary
Gas station oil and gas recovery equipment is a terminal treatment system for oil and gas. It adopts a skid-mounted, explosion-proof structure and has a high degree of automation, making it suitable for collecting and treating volatile oil and gas from gasoline storage tanks. Different configurations provide different processing capacities. Equipment selection should be based on the gas station's scale, environmental impact assessment, and emission standards. Operation should be carried out in accordance with the operating procedures, with regular inspection, maintenance, and environmental monitoring.
