News

New Oil And Gas Recovery Equipment Deployed At Gas Stations

Nov 14, 2026 Leave a message

During the refueling process at gas stations, oil vapors may escape. Tertiary oil and gas recovery equipment, as a supporting device in the overall oil and gas collection system, is gradually being installed at many gas stations across China. Shandong Keshiman Environmental Technology's tertiary oil and gas recovery equipment is designed to meet the oil and gas collection needs of gas station refueling. The following is an introduction to the equipment in several aspects.

I. Basic Equipment Introduction

The tertiary oil and gas recovery equipment is connected to the primary and secondary oil and gas recovery systems of gas stations. It is primarily used to further collect and process oil vapors accumulated in the recovery pipelines during refueling. When the oil vapor concentration and pressure in the secondary recovery pipeline reach preset values, the equipment is activated, guiding the retained oil vapors into the processing unit for collection.

The entire device integrates a control module, power components, and a separation unit. Its compact structure allows it to adapt to the limited installation space available at gas stations, while enabling connection and integration with existing oil and gas recovery pipelines.

II. Main Features of the Equipment

The equipment adopts an explosion-proof design and is suitable for flammable and explosive working environments such as gas stations. It is equipped with pressure and temperature monitoring points, allowing operating parameters to be monitored in real time.

The control system supports automatic operation and can also be switched to manual adjustment, facilitating inspection and maintenance by staff. The equipment generates relatively low noise during operation. The disassembly points for routine maintenance are reasonably arranged, and the replacement of internal consumable components is relatively simple.

The equipment also has a built-in protection mechanism that can trigger an automatic shutdown in the event of abnormal pressure or other abnormal conditions, helping to reduce operational risks on site.

III. Equipment Operation and Usage

After the equipment is installed and connected to the existing oil and gas recovery pipeline, the pipeline sealing condition must be checked and all monitoring instruments must be verified before initial operation.

Under normal operating conditions, the equipment is set to automatic mode and starts or stops automatically according to sensor signals, without requiring continuous operation by dedicated personnel. During daily operation, maintenance personnel regularly check the data displayed on the control cabinet and record information such as pressure and operating time.

According to the specified maintenance cycle, components such as filters and adsorption components are inspected and replaced as needed based on their condition and degree of wear. If maintenance is required, the equipment power must be disconnected first, and the pipeline pressure must be released before any maintenance work is carried out. Site safety operating procedures must be followed throughout the process.

IV. Applicable Scenarios

This equipment is primarily used at vehicle refueling stations, including conventional urban gas stations, highway gas stations, and integrated gas stations in rural areas. It is suitable for retrofitting gasoline refueling systems and can also be used as part of vapor recovery systems at newly constructed gas stations.

Depending on the site layout, the equipment can be installed near the fuel dispenser or within the vapor recovery unit area. It is best suited for continuous operation under normal temperature conditions. In high-humidity or dusty environments, additional protection and more frequent inspections are required.

Summary

As supplementary equipment in the gas station vapor recovery system, this tertiary vapor recovery device, with its automatic monitoring and explosion-proof design, can work together with the overall recovery system to re-collect vapors generated during the refueling process.

Its installation and connection methods are flexible, and the equipment is easy to operate, making it suitable for the retrofit and new construction needs of most conventional gas stations. In actual use, equipment stability depends on regular inspections, standardized maintenance, and the condition of the original pipelines at the site. Site conditions should be taken into account, and commissioning and daily maintenance should be carried out in accordance with the relevant specifications.

Send Inquiry